salut,
alors,
tu appuies sur les cordes à la dernière frette,
et tu mesures la distance entre le micro etles cordes
tu vas sans doute trouver environ 2 millimètres...
voilà un extrait de
http://www.fender.com/support/setup/telesetup.php
Set too high, pickups can cause a myriad of inexplicable phenomena. Depress all of the strings at the last fret. Using 6" (150 mm) ruler, measure the distance from the bottom of the 1st and 6th strings to top of the pole piece. Rule of thumb-the distance should be greatest at the 6th string - neck pickup position, and closest at the 1st string - bridge pickup position. Follow the measurement guidelines from the chart as starting points. The distance will vary according to the amount of magnetic pull of the pickup.
------------------------Bass Side------Treble Side
Texas Specials-------8/64"(3.6 mm)---6/64"(2.4 mm)
Vintage style---------6/64"(2.4 mm)---5/64"(2 mm)
Noiseless™ Series----8/64"(3.6 mm----6/64"(2.4 mm)
Standard Single-Coil-5/64"(2 mm)-----4/64"(1.6 mm)
Humbuckers------------4/64"(1.6 mm)---4/64"(1.6 mm)
Lace Sensors As close as desired (allowing for string vibration)
je n'ai pas trouver de docs équivalentes chez gibson ...
à+ pefmo
le ukulélé est à la guitare ce que le string est au caleçon .
